eufy Robot Vacuum Omni S1 Pro + Replacement Kits
eufy Robot Vacuum Omni S1 Pro + Replacement Kits
1.658,99€
- Always Clean Mop™️: Unveiling a new era in floor care, this revolutionary system boasts an innovative dual water reservoir design. The mop spins at 170 RPM, is continuously cleaned and rinsed by the mix of clean water and detergent, redefining the essence of pristine floors. Emulating human hands scrubbing, it exerts 1 kg (2.2 lb) of pressure, eradicating even the most difficult stains. Spanning 290 mm (11.4 in.), it sweeps across large area, leaving behind nothing.
- 10-in-1 UniClean™️ Station: With it's auto emptying, washing, refilling, heated air drying, Eco-Clean Ozone, waste water collection, detergent dispensing, LCD touch control, hygiene dust bag and faster charging, it ensures unparalleled cleaning with ease and efficiency, offering a worry-free cleaning experience like never before
- Precision Corner to Edge Clean: The sleek square design of S1 Pro tackles hard-to-reach areas, including edges and 90-degree corners, ensuring a thorough deep clean.
- 8,000 Pa Potent Suction: With 8,000 Pa suction power, S1 Pro effortlessly removes deep-seated dust and debris from hard floors and carpets. The detangling brush minimizes hair entanglement, reducing manual maintenance.
- Sportscar Streamlined Build: Breaking away from industry norms, S1 Pro boasts a futuristic, minimalist design with high recognizability. Compact yet comprehensive, it enhances aesthetics and usability, elevating home decor.
- User-Centered Design: S1 Pro features an exclusive LCD Touch Control, making operation intuitive for anyone. Ergonomic optimal height prevents discomfort, and the see-through water tank keeps you informed about water levels.
- 3D MatrixEye™ Obstacle Avoidance: S1 Pro’s advanced obstacle avoidance system, including Active Binocular Infrared Imaging Technology and an RGB Camera, mimics human vision. TrueCourse™ Mapping employs powerful dToF LiDAR and 3D SLAM technology to create real-time home maps with unmatched speed and accuracy.
- Eco-Clean Ozone™️: The built-in ozone generator in the base station’s clean water tank creates ozonated water using tap water. It removes up to 99.99% of bacteria, recommended for better disinfection results.
- 12mm Auto-Retraction: The mop’s auto-retraction lifts it to 12mm, maximizing carpet cleaning effectiveness without damage.
- This set is suitable for families with high cleaning frequency. The kit lasts 6 months. Helps you match the accessories you need and simplifies the process of choosing them.
Hurry! Offer Ends Soon!
??? OFF
Code: ????????
Choice
-
-
eufy Robot Vacuum Omni S1 Pro + Replacement Kits
1.658,99€
-
-
-
-
- 30-Day Money-Back Guarantee
- Hassle-free Warranty
- Lifetime Customer Support
1.658 , 99€
Products Comparison
S1 Pro
1499
Learn MoreGroundbreaking Floor Washing System (Independently developed and patented Always Clean Mop™️, a mop that continuously refreshes itself at 170RPM while cleaning the floor.)：√
Downwards Pressure: 1 kg
Suction: 8,000 Pa
Carpet Cleaning (Raised Mop Height): 12 mm
Auto-Detangling: √
Auto Emptying: √
Auto Washing: √
Auto Drying: 131°F (55°C) Heated Air Dring
Auto Refilling: √
Auto Waste Water Collection: √
Auto Detergent Dispesning : √
Eco-Clean Ozone™️ (Built-in ozone generator transforms tap water into ozonated water for cleaning, with elimination of Escherichia coli bacteria (99.99%) and elimination of Aspergillus niger / Red sphagnum moss (99.8%))：√
LCD Touch Control：√
Obstacle Avoidance Technology：3D MatrixEye™️ (Active Binocular Infrared Imaging Technology, RGB Camera)
Avoidable Types of Obstacles (*Based on eufy internal test. Actual result may vary according to the home environment.)：Any obstacles above 1*1*1 inches
Obstacle Clearance Height: 20 mm
Dimension：
Robot: 325 * 347 * 96 mm
Station：383 * 467 * 670 mm
Minimum Height and Width Restrictions：10.2cm / 42cm
X10 Pro Omni
799€
Learn MoreGroundbreaking Floor Washing System (Independently developed and patented Always Clean Mop™️, a mop that continuously refreshes itself at 170RPM while cleaning the floor.)：×
Downwards Pressure: 1 kg
Suction: 8,000 Pa
Carpet Cleaning (Raised Mop Height): 12 mm
Auto-Detangling: √
Auto Emptying: √
Auto Washing: √
Auto Drying：113°F (45°C)Heated Air Dring
Auto Refilling: √
Auto Waste Water Collection: √
Auto Detergent Dispesning: ×
Eco-Clean Ozone™️ (Built-in ozone generator transforms tap water into ozonated water for cleaning, with elimination of Escherichia coli bacteria (99.99%) and elimination of Aspergillus niger / Red sphagnum moss (99.8%)): ×
LCD Touch Control: ×
Obstacle Avoidance Technology：AI.See™️ （LED Light, RGB Camera, AI Algorithm）
Avoidable Types of Obstacles (*Based on eufy internal test. Actual result may vary according to the home environment.)：100+
Obstacle Clearance Height: 21 mm
Dimension:
Robot: 327mm*353mm*113.5mm
Station：366mm*480mm*460mm
Minimum Height and Width Restrictions：13 cm / 35 cm
Specs
Mop Type
- Always Clean Mop™️
Downward Pressure
- 10N / 1 kg
Rotations Per Minute
- 170 RPM (Maximum)
Dual Water Resevoir (Robot)
- Clean Water Resevoir & Dirty Water Resevoir
Auto Waste Water Collection (Robot)
- Yes
Auto Retraction
- 0.5 in / 12 mm
Maximum Suction Strength
- 8,000 Pa
Side Brush
- Yes
Detangling Brush
- Yes
Vacuuming Noise Level (Standard)
- Under 60 dB
Cleaning Proximity Around Barrier
- Less than 2 cm
Auto Emptying
- Yes
Auto Washing
- Yes
Auto Refilling
- Yes
Auto Heated Air Drying
- Yes
Eco-Clean Ozone™
- Yes
Auto Waste Water Collection
- Yes
Auto Detergent Dispensing
- Yes
LCD Touch Control
- Yes
Anti-Bacteria Dust Bag
- Yes
Charging Time
- 4 Hours
Dust Collection Capacity
- Robot: 250 ml / Station: 2.5 L
Clean Water Tank Capacity
- Robot: 240 ml / Station: 3.0 L
Dirty Water Tank Capacity
- Robot: 220 ml / Station: 2 L
Station Dimensions
- 15.1 × 18.4 × 26.4 in / 383 × 467 × 670 mm
Robot Dimensions
- 12.8 × 13.7 × 3.8 in / 325 × 347 × 96 mm
Station Weight
- 19.09 lb / 8.66 kg
Robot Weight
- 11.33 lb / 5.14 kg
Obstacle Avoidance
- 3D MatrixEye™
Mapping Type
- TrueCourse™ Mapping
Navigation Type
- dToF LiDAR
App Control
- Yes
LCD Touch Control
- Yes
Bluetooth
- Yes
Wi-Fi
- 2.4GHz
FAQ
- Automatic Base Station Mop Washing: S1 Pro autonomously returns to its base station to wash the mop pad, ensuring a clean mop at the start of each cleaning session and consistent results.
- Continuous Mop Self-Cleaning: During its cleaning cycle, S1 Pro constantly cleans the mop pad in real-time, removing dirt and debris into a separate compartment. This maintains the mop’s cleanliness and enhances floor cleaning effectiveness.
- Automated Mop Drying Function: After cleaning, S1 Pro initiates a mop drying process, preventing odors and inhibiting bacterial growth. This makes your home’s floors more hygienic and safer for all family members, including the elderly.
- S1 Pro’s intelligent navigation system further ensures efficient coverage of the cleaning area, making it a convenient and reliable cleaning companion for users of all ages.
If you notice that the vacuum is not effectively picking up pet hair or other fine debris, or if it mistakenly identifies long carpet fibers as obstacles, avoids cleaning under furniture, or keeps a considerable distance from cabinet edges, you may need to adjust its settings for better performance. Here’s how to do it:
Open the eufy Clean app.
Go to the Settings page.
Select 'Robot Settings'.
Disable the 'Tiny Obstacle Avoidance' feature.
Disabling 'Tiny Obstacle Avoidance' allows S1 Pro to pick up smaller debris without avoiding them. However, note that with this feature turned off, the robot will only pass under furniture if the clearance height is over 10.2 cm. Be aware that deactivating this feature could cause the vacuum to interact with and potentially collect very small objects, which may increase the risk of blockages or damage. Therefore, it is recommended to use this setting cautiously and to monitor the vacuum’s performance to ensure it meets your cleaning needs.
- Carpet Detection Technology: Equipped with sensors, S1 Pro detects carpets and automatically lifts the rolling mop to avoid wetting the carpet during mopping.
- Customizable No-Go Zones: For carpets with a pile height exceeding 2.5 cm (0.9 inches) or those that are particularly light and thin, create no-go zones within the app. This prevents the robot from getting trapped or tangled in carpet fibers.
- Carpet Edge Management: If your carpet edges tend to curl, flatten or secure them to ensure smooth navigation for S1 Pro.
- Avoidance of Dark or Reflective Surfaces: Remove black or highly reflective objects near thresholds to prevent confusion in the robot’s navigation system.
- No-Mop Zones: Designate no-mop zones in areas where the mop might not lift in time, ensuring your carpets remain dry. By following these guidelines, you can optimize S1 Pro’s mopping performance and maintain the cleanliness of both your hard floors and carpeted areas without manual intervention.
Customer Reviews
Easy to use and good quality
Super robot super
Great product so far. Let's wait and see how it is in the long run. My Dreame X40 became unusable after +-12 uses. Still waiting for a solution.
